Rob
2007-08-02 18:30:24 UTC
Hello,
I am attempting to install/configure an HP Color LaserJet 3600dn
printer on a Silicon Graphics (SGI) Octane system running Irix 6.5.5.
The printer and system are connected via ethernet and the printer is
ping'able from the system. I have Open SuSE 10.2 and Windows XP
system that can print correctly to this printer verifying that the
printer is fully operational.
My initial attempt to print from the Octane was by using an old HP
LaserJet 5M postscript driver through the printers GUI from the
toolchest. This resulted in the printer printing one page with a few
lines of garbage and then maybe twenty blank pages. I then tried a
few of the other available drivers with similar or no results. I
tried sharing the printer on one of the Open SuSE systems and
configuring my Octane to print to another host, again through the
printers GUI. This also failed.
I have now removed all of the printing software from my Octane and
installed the CUPS, Foomatic, xpp, hpijs, a2ps packages, and all
package dependencies. The installed packages are from the most recent
SGI Freeware CDs.
# uname -Ra
IRIX64 Launch 6.5 6.5.5f 07151440 IP30
# versions | grep -i cups
I fw_cups 08/01/2007 cups-1.1.19 Common UNIX Printing
System
I fw_cups.man 08/01/2007 cups-1.1.19 man pages
I fw_cups.man.cups 08/01/2007 cups-1.1.19 man pages
I fw_cups.man.doc 08/01/2007 cups-1.1.19 misc. documentation
I fw_cups.man.relnotes 08/01/2007 cups-1.1.19 release notes
I fw_cups.sw 08/01/2007 cups-1.1.19 execution only env
I fw_cups.sw.cups 08/01/2007 cups-1.1.19 execution only env
I fw_cups.sw.hdr 08/01/2007 cups-1.1.19 header files
I fw_cups.sw.lib 08/01/2007 cups-1.1.19 shared libraries
I fw_cups.sw.samba 08/01/2007 cups-1.1.19 Windows NT/2000/XP
drivers
I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter
scripts for CUPS + Ghostscript
I fw_ghostscript.sw.cups 08/01/2007 ghostscript-7.05 CUPS non-PS
printer support
I fw_gimp-print 08/01/2007 gimp-print-4.2.5 print facility
for GIMP and CUPS
I fw_gimp-print.sw.cups 08/01/2007 gimp-print-4.2.5 CUPS driver
I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS
# versions | grep -i foomatic
I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter
scripts for CUPS + Ghostscript
I fw_foomatic-filters.man 08/01/2007 foomatic-filters-3.0.0 man
pages
I fw_foomatic-filters.man.doc 08/01/2007 foomatic-filters-3.0.0
misc. documentation
I fw_foomatic-filters.man.foomatic-filters 08/01/2007 foomatic-
filters-3.0.0 man pages
I fw_foomatic-filters.man.relnotes 08/01/2007 foomatic-
filters-3.0.0 release notes
I fw_foomatic-filters.sw 08/01/2007 foomatic-filters-3.0.0
execution only env
I fw_foomatic-filters.sw.foomatic-filters 08/01/2007 foomatic-
filters-3.0.0 execution only env
# versions | grep -i xpp
I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS
I fw_xpp.man 08/01/2007 xpp-1.1 man pages
I fw_xpp.man.relnotes 08/01/2007 xpp-1.1 release notes
I fw_xpp.sw 08/01/2007 xpp-1.1 execution only env
I fw_xpp.sw.xpp 08/01/2007 xpp-1.1 execution only env
# versions | grep -i hpijs
I fw_hpijs 08/02/2007 hpijs-1.4.1 HP IJS printer drivers
for Ghostscript
I fw_hpijs.man 08/02/2007 hpijs-1.4.1 man pages
I fw_hpijs.man.doc 08/02/2007 hpijs-1.4.1 misc. documentation
I fw_hpijs.man.relnotes 08/02/2007 hpijs-1.4.1 release notes
I fw_hpijs.src 08/02/2007 hpijs-1.4.1 original source code
I fw_hpijs.src.hpijs 08/02/2007 hpijs-1.4.1 original source code
I fw_hpijs.sw 08/02/2007 hpijs-1.4.1 execution only env
I fw_hpijs.sw.hpijs 08/02/2007 hpijs-1.4.1 execution only env
# versions | grep -i a2ps
I fw_a2ps 08/02/2007 a2ps-4.13b Pretty-print files in
postscript
I fw_a2ps.man 08/02/2007 a2ps-4.13b man pages
I fw_a2ps.man.a2ps 08/02/2007 a2ps-4.13b man pages
I fw_a2ps.man.info 08/02/2007 a2ps-4.13b info pages
I fw_a2ps.man.relnotes 08/02/2007 a2ps-4.13b release notes
I fw_a2ps.src 08/02/2007 a2ps-4.13b original source code
I fw_a2ps.src.a2ps 08/02/2007 a2ps-4.13b original source code
I fw_a2ps.sw 08/02/2007 a2ps-4.13b execution only env
I fw_a2ps.sw.a2ps 08/02/2007 a2ps-4.13b execution only env
I used chkconfig to turn on fw_cups and rebooted the system. Using
the documentation I found on SGI's Freeware website I pointed Netscape
at localhost:631 to administrate CUPS. I installed my printer using
the following procedure:
1.) Clicked on "Printers" in the horizontal link menu
2.) Clicked on "Add New Printer"
3.) Entered in the following information
a.) Name: HPLaserJet
b.) Location: MEI COS Lab
c.) Description: HP Color LaserJet 3600dn
4.) Selected "AppSocket/HP JetDirect" in the "Device:" drop-down menu
5.) Entered in "socket://laserjet:9100" for "Device URL:"
6.) Selected "HP" for "Make:"
7.) Selected "HP Color LaserJet 3600 Foomatic/hpijs (en)" for "Model:"
*laserjet is a known hostname in /etc/hosts
# ping laserjet
PING LaserJet (198.49.246.214): 56 data bytes
64 bytes from 198.49.246.214: icmp_seq=0 ttl=64 time=0.542 ms
That completed the installation of the printer. When I clicked on
"Print Test Page" my printer errors with "Chosen Personality Not
Available". Further, when I type "echo hello | lp" I get the same
error message.
The output of lpstat -t shows:
# lpstat -t
scheduler is running
system default destination: HPLaserJet
device for HPLaserJet: socket://laserjet:9100/
HPLaserJet accepting requests since Jan 01 00:00
printer HPLaserJet is idle. enabled since Jan 01 00:00
I have no idea why this isn't working. Any help would be appreciated.
Thanks in advance,
Rob
I am attempting to install/configure an HP Color LaserJet 3600dn
printer on a Silicon Graphics (SGI) Octane system running Irix 6.5.5.
The printer and system are connected via ethernet and the printer is
ping'able from the system. I have Open SuSE 10.2 and Windows XP
system that can print correctly to this printer verifying that the
printer is fully operational.
My initial attempt to print from the Octane was by using an old HP
LaserJet 5M postscript driver through the printers GUI from the
toolchest. This resulted in the printer printing one page with a few
lines of garbage and then maybe twenty blank pages. I then tried a
few of the other available drivers with similar or no results. I
tried sharing the printer on one of the Open SuSE systems and
configuring my Octane to print to another host, again through the
printers GUI. This also failed.
I have now removed all of the printing software from my Octane and
installed the CUPS, Foomatic, xpp, hpijs, a2ps packages, and all
package dependencies. The installed packages are from the most recent
SGI Freeware CDs.
# uname -Ra
IRIX64 Launch 6.5 6.5.5f 07151440 IP30
# versions | grep -i cups
I fw_cups 08/01/2007 cups-1.1.19 Common UNIX Printing
System
I fw_cups.man 08/01/2007 cups-1.1.19 man pages
I fw_cups.man.cups 08/01/2007 cups-1.1.19 man pages
I fw_cups.man.doc 08/01/2007 cups-1.1.19 misc. documentation
I fw_cups.man.relnotes 08/01/2007 cups-1.1.19 release notes
I fw_cups.sw 08/01/2007 cups-1.1.19 execution only env
I fw_cups.sw.cups 08/01/2007 cups-1.1.19 execution only env
I fw_cups.sw.hdr 08/01/2007 cups-1.1.19 header files
I fw_cups.sw.lib 08/01/2007 cups-1.1.19 shared libraries
I fw_cups.sw.samba 08/01/2007 cups-1.1.19 Windows NT/2000/XP
drivers
I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter
scripts for CUPS + Ghostscript
I fw_ghostscript.sw.cups 08/01/2007 ghostscript-7.05 CUPS non-PS
printer support
I fw_gimp-print 08/01/2007 gimp-print-4.2.5 print facility
for GIMP and CUPS
I fw_gimp-print.sw.cups 08/01/2007 gimp-print-4.2.5 CUPS driver
I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS
# versions | grep -i foomatic
I fw_foomatic-filters 08/01/2007 foomatic-filters-3.0.0 filter
scripts for CUPS + Ghostscript
I fw_foomatic-filters.man 08/01/2007 foomatic-filters-3.0.0 man
pages
I fw_foomatic-filters.man.doc 08/01/2007 foomatic-filters-3.0.0
misc. documentation
I fw_foomatic-filters.man.foomatic-filters 08/01/2007 foomatic-
filters-3.0.0 man pages
I fw_foomatic-filters.man.relnotes 08/01/2007 foomatic-
filters-3.0.0 release notes
I fw_foomatic-filters.sw 08/01/2007 foomatic-filters-3.0.0
execution only env
I fw_foomatic-filters.sw.foomatic-filters 08/01/2007 foomatic-
filters-3.0.0 execution only env
# versions | grep -i xpp
I fw_xpp 08/01/2007 xpp-1.1 X Printing Panel for CUPS
I fw_xpp.man 08/01/2007 xpp-1.1 man pages
I fw_xpp.man.relnotes 08/01/2007 xpp-1.1 release notes
I fw_xpp.sw 08/01/2007 xpp-1.1 execution only env
I fw_xpp.sw.xpp 08/01/2007 xpp-1.1 execution only env
# versions | grep -i hpijs
I fw_hpijs 08/02/2007 hpijs-1.4.1 HP IJS printer drivers
for Ghostscript
I fw_hpijs.man 08/02/2007 hpijs-1.4.1 man pages
I fw_hpijs.man.doc 08/02/2007 hpijs-1.4.1 misc. documentation
I fw_hpijs.man.relnotes 08/02/2007 hpijs-1.4.1 release notes
I fw_hpijs.src 08/02/2007 hpijs-1.4.1 original source code
I fw_hpijs.src.hpijs 08/02/2007 hpijs-1.4.1 original source code
I fw_hpijs.sw 08/02/2007 hpijs-1.4.1 execution only env
I fw_hpijs.sw.hpijs 08/02/2007 hpijs-1.4.1 execution only env
# versions | grep -i a2ps
I fw_a2ps 08/02/2007 a2ps-4.13b Pretty-print files in
postscript
I fw_a2ps.man 08/02/2007 a2ps-4.13b man pages
I fw_a2ps.man.a2ps 08/02/2007 a2ps-4.13b man pages
I fw_a2ps.man.info 08/02/2007 a2ps-4.13b info pages
I fw_a2ps.man.relnotes 08/02/2007 a2ps-4.13b release notes
I fw_a2ps.src 08/02/2007 a2ps-4.13b original source code
I fw_a2ps.src.a2ps 08/02/2007 a2ps-4.13b original source code
I fw_a2ps.sw 08/02/2007 a2ps-4.13b execution only env
I fw_a2ps.sw.a2ps 08/02/2007 a2ps-4.13b execution only env
I used chkconfig to turn on fw_cups and rebooted the system. Using
the documentation I found on SGI's Freeware website I pointed Netscape
at localhost:631 to administrate CUPS. I installed my printer using
the following procedure:
1.) Clicked on "Printers" in the horizontal link menu
2.) Clicked on "Add New Printer"
3.) Entered in the following information
a.) Name: HPLaserJet
b.) Location: MEI COS Lab
c.) Description: HP Color LaserJet 3600dn
4.) Selected "AppSocket/HP JetDirect" in the "Device:" drop-down menu
5.) Entered in "socket://laserjet:9100" for "Device URL:"
6.) Selected "HP" for "Make:"
7.) Selected "HP Color LaserJet 3600 Foomatic/hpijs (en)" for "Model:"
*laserjet is a known hostname in /etc/hosts
# ping laserjet
PING LaserJet (198.49.246.214): 56 data bytes
64 bytes from 198.49.246.214: icmp_seq=0 ttl=64 time=0.542 ms
That completed the installation of the printer. When I clicked on
"Print Test Page" my printer errors with "Chosen Personality Not
Available". Further, when I type "echo hello | lp" I get the same
error message.
The output of lpstat -t shows:
# lpstat -t
scheduler is running
system default destination: HPLaserJet
device for HPLaserJet: socket://laserjet:9100/
HPLaserJet accepting requests since Jan 01 00:00
printer HPLaserJet is idle. enabled since Jan 01 00:00
I have no idea why this isn't working. Any help would be appreciated.
Thanks in advance,
Rob